Pre-release Builds

Commits

• 653121c: SafeBoot image update (Mathieu Carbou)

v1.0.0-rc10

Changes

• Fix MQTT bug: topics were not subscribed anymore
• Lib upgrade
• Updates in UI interface
• Introduced Output 1 Dimmer Type and Output 2 Dimmer Type in Hardware config tab
• Finalized and tested support for LSA + PWM->Analog 0-10V + ZCD
• Only show ETH IP and MAC for ETH boards in stats
• Removed device revision in stats
• Rename Input Only to Input to avoid confusion with I/O in Hardware tab
• Fix output tab not displayed when only DS18 hardware was activated
• Memory improvement: Activating -D U8G2_USE_DYNAMIC_ALLOC=1 to save 2K of RAM when display not enabled

Warning

Added a new drop-down in Hardware config page to allow you to select the right dimmer type.

YaSolR will soon support PWM based LSA and DAC LSA.

• Supported dimmers: https://yasolr.carbou.me/#dimmer-required
• Manuel: https://yasolr.carbou.me/manual#dimmer-type

Full Changelog: v1.0.0-rc9...v1.0.0-rc10

🐛 Fixes

• fix script
• Fix version script
• Fix version script
• Fix version script
• Fix version script
• fix script
• Fix frequency not read from right place for jsy remote
• Fix UI components
• Fix dimmer bug
• Fix OSS compile issue
• fix compile issue
• Fix output tab not displayed when only DS18 hardware was activated
• Fix components displayed for outputs depending on grid electricity status

🛠 Under the hood

• mathieucarbou/ESPAsyncWebServer @ 3.3.22
• added commented line
• mathieucarbou/MycilaPZEM004Tv3 @ 5.0.0
• Bug fixes and add support for ZC pin of JSY-Mk-194T
• append_body: true
• mathieucarbou/MycilaEasyDisplay @ 3.0.2
• mathieucarbou/MycilaHADiscovery @ 5.0.1
• mathieucarbou/MycilaTrafficLight @ 1.1.1
• mathieucarbou/MycilaMQTT @ 4.2.3
• mathieucarbou/MycilaWebSerial @ 6.4.2
• mathieucarbou/MycilaESPConnect @ 6.1.1
• mathieucarbou/MycilaPulseAnalyzer @ 2.5.0
• mathieucarbou/MycilaConfig @ 4.0.0
• mathieucarbou/MycilaJSY @ 11.1.2
• Switched back to AsyncTCP
• mathieucarbou/MycilaJSY @ 11.1.3
• mathieucarbou/AsyncTCP @ 3.2.13
• mathieucarbou/AsyncTCP @ 3.2.14
• mathieucarbou/MycilaConfig @ 5.0.0
• mathieucarbou/MycilaConfig @ 6.0.1
• mathieucarbou/MycilaConfig @ 6.0.2
• mathieucarbou/MycilaESPConnect @ 7.0.0
• mathieucarbou/MycilaHADiscovery @ 6.0.0
• mathieucarbou/MycilaConfig @ 6.0.3
• mathieucarbou/MycilaSystem @ 4.0.0
• mathieucarbou/MycilaNTP @ 6.0.2
• mathieucarbou/MycilaTrafficLight @ 2.0.0
• mathieucarbou/MycilaWebSerial @ 7.0.0
• strlen optimization
• Switched to std::string
• mathieucarbou/MycilaConfig @ 7.0.3
• mathieucarbou/ayushsharma82-ESP-DASH
• ESP-DASH Pro update
• cleanup
• hybrid
• bblanchon/ArduinoJson @ 7.2.1
• Bugfix: virtual grid power was not correctly computed with PZEM
• mathieucarbou/MycilaUtilities @ 3.1.1
• Remove on/off with duration
• new mqtt lib with string_view support
• Arduino Core 3.1.0 RC3 / ESP-IDF 5.3
• Updating mqtt related libraries to add move semantic
• code cleanup
• Update to mathieucarbou/MycilaJSY @ 12.0.0 which adds support for JSY-MK-193
• ESPDashPro minor update
• mathieucarbou/ESPAsyncWebServer @ 3.3.23
• mathieucarbou/MycilaDS18 @ 4.1.2
• mathieucarbou/MycilaUtilities @ 3.1.1
• mathieucarbou/MycilaNTP @ 6.0.4
• Small updates and fixes
• Update i18n
• ESP-DASH v5
• Merge pull request #41 from mathieucarbou/espdash-v5
• mathieucarbou/MycilaUtilities @ 3.1.3
• mathieucarbou/MycilaMQTT @ 6.0.3
• mathieucarbou/MycilaMQTT @ 6.0.4
• [Move onZeroCross() to dimmer lib](ad681f416af511d7d...

v1.0.0-rc9

What's changed

• Dependency upgrade
• Make sure that dimmers will start once ZCD module detects electricity after startup
• CI improvements
• Relay switching threshold set to 5%

Full Changelog: v1.0.0-rc8...v1.0.0-rc9

🛠 Under the hood

• mathieucarbou/MycilaJSY @ 13.0.2
• Do not keep elf files anymore
• Code rename and relay switch simplification
• Make sure that dimmers will start once ZCD module detects electricity after startup

v1.0.0-rc8

What's changed

• bug fixes
• memory improvements
• code refactoring
• dependency update
• Debug option moved to Hardware section
• All Hardware change require a reboot to be activated (for memory improvements)
• routing task now reacts faster and immediately to changes
• Default PID parameters updated
• graphs now have a maximum of 60 points for speed and memory improvement
• JSY Remote can also be used to measure router output on channel 1 (for example, with a JSY-MK-194 or 193 in the electric panel measuring Enedis plus water heater circuit)
• Added Hardware option to activate JSY Remote
• Removed WebSocket endpoint for PID output
• Excess Power Limiter (W) allows to set an amount of power reserved for an output, to share the grid excess to the second output.

Full Changelog: v1.0.0-rc7...v1.0.0-rc8

🐛 Fixes

• Fix OSS compile issue
• fix compile issue

🛠 Under the hood

• dimmable light tweak
• changed PID defaults
• Remove routing task: now react immediately to grid power change instead of waiting for task to be scheduled (saves a few microseconds)
• added comment
• code cleanup
• WS push before dashboard update
• code cleanup around routingTask
• cleanup debug logging
• refactored grid data and grid frequency sources
• Fixed new default PID settings
• Task and memory optimisations
• reformat
• graph memory optimisation
• code refactoring
• Enabling / Disabling Hardware now require a restart
• MycilaGrid split in header/cpp file
• updated declaration ordering
• reordering
• cleanup
• code cleanup
• grid.getPower()
• Decouple JSY from Router + Several fixes:
• cpplint
• update logging
• Reorganizing tasks
• Introduced JSY Remote flag to only listen for JSY remote data when required
• added jsyr_enable to backup config page
• cpplint
• Code reorg
• Remove "Chart Reset" button
• Remove PID WebSocket output (/ws/pid/csv)
• simplification
• yasolr_start_jsy_remote_listener()
• yasolr_start_jsy()
• activate sections only when components are enabled
• Fixing temperature display when component not enabled or temp not available or expired
• cpplint
• yasolr_start_ds18()
• rename file
• yasolr_start_display()
• yasolr_start_lights()
• yasolr_start_zcd()
• only create tasks if hardware enabled
• yasolr_start_website()
• yasolr_start_logging()
• yasolr_start_rest_api()
• yasolr_start_config()
• cleanup and cpplint
• rename
• yasolr_start_pzem()
• cleanup
• yasolr_start_trial()
• cleanup
• yasolr_start_grid()
• twdt to boot
• trial expired checked when starting trial
• yasolr_start_system()
• yasolr_start_network()
• cleanup
• yasolr_start_mqtt()
• code cleanup
• code cleanup
• renames and moves
• bblanchon/ArduinoJson @ 7.3.0
• code cleanup and logging review
• code cleanup and bug fixes
• code cleanup + logging set for once at boot time (debug mode requires restart)
• code cleanup and lib updates
• avoids nan for virtual_grid_power
• mathieucarbou/MycilaUtilities @ 3.2.0
• Add support for derivative mode "On Error Rate"
• Fixed and tested excess power sharing by limiting the power reserved to an output
• [yasolr_init_relays()](https://github.com...

v1.0.0-rc7

What's changed

• Critical fix in automatic dimmer mode

Full Changelog: latest...v1.0.0-rc7

🐛 Fixes

• Fix dimmer bug

🛠 Under the hood

• mathieucarbou/AsyncTCP @ 3.3.0
• mathieucarbou/ESPAsyncWebServer @ 3.4.1
• mathieucarbou/AsyncTCP @ 3.3.1 and mathieucarbou/ESPAsyncWebServer @ 3.4.2
• pioarduino 53.03.10
• mathieucarbou/ESPAsyncWebServer @ 3.4.3
• mathieucarbou/ESPAsyncWebServer @ 3.4.4
• mathieucarbou/ESPAsyncWebServer @ 3.4.5
• code cleanup
• typo
• mathieucarbou/MycilaTaskManager @ 3.1.5
• Reducing KEY_PID_OUT_MIN for more reactivity
• reducing the number of points in graphs

v1.0.0-rc6

Changes

• Several fixes in the behaviour of dimmer and bypass when grid electricity is not there (now, switch and dimmer position are kept in position)
• Completed support for all JSY models bi-directionnal with 2 channels (193, 194) or 1 channel (163, 227, 229, 333) - see MycilaJSY library
• Fixed crash when ESP reconnects to WiFi after diconnection
• Library upgrades and other fixes and perf imrpovements
• Switched to brand new ESP-DASH and ESP-DASH-Pro v5 codebase which improves component speed and memory usage
• Switched to STL string

Full Changelog: v1.0.0-rc5...v1.0.0-rc6

🛠 Under the hood

• code cleanup
• Update to mathieucarbou/MycilaJSY @ 12.0.0 which adds support for JSY-MK-193
• ESPDashPro minor update
• mathieucarbou/ESPAsyncWebServer @ 3.3.23
• mathieucarbou/MycilaDS18 @ 4.1.2
• mathieucarbou/MycilaUtilities @ 3.1.1
• mathieucarbou/MycilaNTP @ 6.0.4
• Small updates and fixes
• Update i18n
• ESP-DASH v5
• Merge pull request #41 from mathieucarbou/espdash-v5
• mathieucarbou/MycilaUtilities @ 3.1.3
• mathieucarbou/MycilaMQTT @ 6.0.3
• mathieucarbou/MycilaMQTT @ 6.0.4
• Move onZeroCross() to dimmer lib
• Dimmer: set semi-period on uint16_t
• mathieucarbou/MycilaPulseAnalyzer @ 3.0.0
• ESP-DASH v5 Update
• Lot of fixes around dimmer, relay and bypass control to still be able to control them in case of transient power cut
• Small dimmer fixes
• mathieucarbou/MycilaJSY @ 13.0.0
• Update CONFIG_ASYNC_TCP settings
• Update AsyncTCP + ESPAsyncWebServer
• mathieucarbou/MycilaNTP @ 6.0.5
• Add support for all JSY models

v1.0.0-rc5

Changes

• Perf improvements
• Fix: virtual grid power was not correctly computed when only one PZEM was installed

Full Changelog: v1.0.0-rc4...v1.0.0-rc5

🐛 Fixes

• Fix frequency not read from right place for jsy remote
• Fix UI components

🛠 Under the hood

• mathieucarbou/MycilaConfig @ 7.0.3
• mathieucarbou/ayushsharma82-ESP-DASH
• ESP-DASH Pro update
• cleanup
• hybrid
• bblanchon/ArduinoJson @ 7.2.1
• Bugfix: virtual grid power was not correctly computed with PZEM
• mathieucarbou/MycilaUtilities @ 3.1.1
• Remove on/off with duration
• new mqtt lib with string_view support
• Arduino Core 3.1.0 RC3 / ESP-IDF 5.3
• Updating mqtt related libraries to add move semantic

v1.0.0-rc4

Changes

• Libs updates and code ckeanups
• Improved ZCD module detection to better support also the Zero-Cross pin of the JSY-MK-194G

Full Changelog: v1.0.0-rc3...v1.0.0-rc4

🛠 Under the hood

• append_body: true
• mathieucarbou/MycilaEasyDisplay @ 3.0.2
• mathieucarbou/MycilaHADiscovery @ 5.0.1
• mathieucarbou/MycilaTrafficLight @ 1.1.1
• mathieucarbou/MycilaMQTT @ 4.2.3
• mathieucarbou/MycilaWebSerial @ 6.4.2
• mathieucarbou/MycilaESPConnect @ 6.1.1
• mathieucarbou/MycilaPulseAnalyzer @ 2.5.0
• mathieucarbou/MycilaConfig @ 4.0.0
• mathieucarbou/MycilaJSY @ 11.1.2
• Switched back to AsyncTCP
• mathieucarbou/MycilaJSY @ 11.1.3
• mathieucarbou/AsyncTCP @ 3.2.13
• mathieucarbou/AsyncTCP @ 3.2.14
• mathieucarbou/MycilaConfig @ 5.0.0
• mathieucarbou/MycilaConfig @ 6.0.1
• mathieucarbou/MycilaConfig @ 6.0.2
• mathieucarbou/MycilaESPConnect @ 7.0.0
• mathieucarbou/MycilaHADiscovery @ 6.0.0
• mathieucarbou/MycilaConfig @ 6.0.3
• mathieucarbou/MycilaSystem @ 4.0.0
• mathieucarbou/MycilaNTP @ 6.0.2
• mathieucarbou/MycilaTrafficLight @ 2.0.0
• mathieucarbou/MycilaWebSerial @ 7.0.0
• strlen optimization
• Switched to std::string

v1.0.0-rc3

Summary

• Fixed bugs with Zero-Cross detection (timers) and Arduino Core 3.1.x / ESP-IDf 5.3.x
• Fixes in MycilaJSY
• Fixes in MycilaPZEM004Tv3
• Add support for the Zero-Cross detection of the JSY-MK-194G

🛠 Under the hood

• mathieucarbou/ESPAsyncWebServer @ 3.3.22
• added commented line
• mathieucarbou/MycilaPZEM004Tv3 @ 5.0.0
• Bug fixes and add support for ZC pin of JSY-Mk-194T

v1.0.0-rc2

🐛 Fixes

• Minor fix: the version script was not correctly reporting the tag name for the version